Building node
city
Generate a whole city district: a (noise-warped) street grid with asphalt roads and dashed lane markings, raised sidewalks/curbs around each block, blocks subdivided into lots, and one procedural building per lot (see 'building'), tallest in the centre falling off towards the edges; some lots become parks, low buildings may get pitched roofs. Output prim attributes material (road, marking, sidewalk, grass, plus building materials), name ('roads', 'sidewalks', 'b12/facade', ...) and Cd. Detail attribs: buildings, lots. Default 360 m district builds in a few seconds.
Inputs
None: this node generates geometry from its parameters.
Parameters 19
sizevector 2City extent in X and Z (m).
block_sizevector 2Road grid spacing in X and Z (m, centre to centre).
warpfloatOrganic distortion of the street grid as a fraction of block size (0 = Manhattan grid, 0.3 = old-town).
road_widthfloatCarriageway width (m).
sidewalk_widthfloatSidewalk width on each side (m).
curb_heightfloatHeight of sidewalks/blocks above the road.
lot_sizefloatTarget lot width (m); blocks are subdivided into lots of about this size, one building each.
lot_gapfloatGap between neighbouring buildings (m).
max_floorsintFloors of the tallest towers in the centre.
min_floorsintFloors of the smallest buildings at the outskirts.
center_fallofffloatHow fast height falls off from the centre (fraction of the half-diagonal; smaller = tighter downtown).
height_variationfloatRandom per-building height variation.
park_chancefloatProbability a lot becomes a grass park.
pitched_roof_chancefloatProbability that low buildings (<= 4 floors) with rectangular lots get gable/hip roofs.
detailmenuFacade detail of the buildings (low keeps big cities light).
markingstoggleDashed white lane markings on road centre lines.
seedintRandom seed (layout, heights, colours).
translatevector 3Position of the generated asset
rotate_yfloatRotation around Y in degrees
Use it
Add it from the node menu (right-click empty graph space or Tab, then type city), ask the AI for it by name, or add it with a graph op from the API or MCP:
{"op":"add","type":"city","name":"my_city","params":{},"inputs":[]}Any parameter can also be an expression such as "=sin(F*0.1)". See Parameters & expressions.