Building node

bridge

Stone arch bridge (viaduct): a solid spandrel body pierced by arches, projecting arch rings, a cornice, road deck and parapet walls. Without input: spans 'span' along X centred at the origin with the deck at y=0 and the base at y=-height. With input 0: spans from the first to the last point of the first curve (straight), deck at their average height. Output prim attribs material (stone, arch, trim, road), name ('bridge/body', ...), Cd.

Inputs

Parameters 13

spanfloat
Default 60Range 2 to …

Bridge length when no curve is connected (along X, centred).

widthfloat
Default 8Range 1 to …

Deck width (m).

heightfloat
Default 12Range 1 to …

Deck height above the base/water level (m).

archesint
Default 3Range 1 to 50

Number of arches.

pier_widthfloat
Default 3Range 0.2 to …

Width of the piers between arches (m).

abutmentfloat
Default 4Range 0.2 to …

Width of the solid end blocks (m).

arch_risefloat
Default 0.9Range 0.1 to 1

Arch rise relative to half its span (1 = semicircle, lower = flatter segmental arch).

ringfloat
Default 0.8Range 0 to …

Thickness of the projecting arch ring (voussoirs) (m).

deck_thicknessfloat
Default 1.2Range 0.1 to …

Deck/cornice zone above the arch crowns (m).

parapet_heightfloat
Default 1Range 0 to …

Parapet wall height (m).

arch_segmentsint
Default 20Range 4 to 128

Polygon segments per arch curve.

translatevector 3
Default [0, 0, 0]

Position of the generated asset

rotate_yfloat
Default 0

Rotation around Y in degrees

Use it

Add it from the node menu (right-click empty graph space or Tab, then type bridge), ask the AI for it by name, or add it with a graph op from the API or MCP:

{"op":"add","type":"bridge","name":"my_bridge","params":{},"inputs":["src"]}

Any parameter can also be an expression such as "=sin(F*0.1)". See Parameters & expressions.